With Ram-Snaps you don't have to stop pouring when you reach the brick ledge!
Using 2 x lumber, cut the board equal to the width of the brick ledge.
Drill 1/2" holes for the attachment of the Ram-Snap fastener to the brick ledge form. Cut inspection holes in the lumber and thread a Ram-Snap fastener through the center of the cutout. When the concrete reaches the brick ledge reinstall the cutout using the Ram-Snap to anchor it in place. Continue your pour. The lumber provides a finished brick ledge with no additional work. The ledge board is secured in place with Ram-Snaps.
It doesn't get easier, or faster than this!