Installing Weld Plates and Joist Bearing Plates

If your project requires weld plates: Ram-Snap is there to help!
Have your steel supplier drill a 1/2" hole in the middle of the weld plate. If the plate is large add additional holes as needed. Wrap a Ram-Snap around a bar and pull it through a plate. Cut a slice in the form using a drywall saw, and slide the Ram-Snap through the block. Slide a board with a 1/2" hole over the Ram-Snap. Use the Ram-Snap tool and apply pressure against the board. When you can see a 3/4" gap between the board and the tool insert the clip and you are ready to pour!

Attach weld plates anywhere on the wall, simply, easily, and effectively!